Industrial Vacuum Systems for Every Need and Budget

Cardinal Air is proud to offer Eurovac industrial vacuum systems. These industrial vacuum systems bring many advantages to your work environment:

  • designed to run all day, every day
  • need minimal maintenance requirements
  • feature built-in primary cyclonic separation for superior filtration

Cardinal Air is Your Experienced Air Solution Specialist

Cardinal Air offers you proven experience and engineering expertise in developing customized air quality solutions, including industrial vacuum systems. Ready to help you meet your specific needs and challenges with knowledgeable guidance, Cardinal Air believes in bringing the best performance and value to every project we serve.

Tell Us About Your Project

Industrial Vacuum Systems

  • Eurovac II 2.5HP Central Vacuum System
    • Eurovac II 2.5HP Central Vacuum System

      Specifications
      • Powerful 2.5HP Pump – produces 125” of water column and 115” of free flow CFM
      • Superior Filtration – cyclonic filtration removes 99% of dust before secondary filter, much more efficient than units without cyclonic filtration
      • Quiet – muffler and insulated motor housing reduce noise level below 65 dBA
      • Inlet – system provided with inlet already pre-mounted onto the unit; alternatively system can have piping and multiple drops located throughout a shop
      • On/Off feature – Micro switch turns system on and off when hose is plugged into inlet (when used as a central system)
      • Easy to Install
      Optional Features:
      • Automatic pulse cleaning system, leg mounted stand option, HEPA filtration, brushless motor

       

  • Eurovac II 5HP Central Vacuum System
    • Eurovac II 5HP Central Vacuum System

      Specifications
      • Powerful 5HP Pump – produces 125” of water column and 232” of free flow CFM
      • Superior Filtration – cyclonic filtration removes 99% of dust before the secondary filter, much more efficient than units without cyclonic filtration;  remaining 1% of dust removed by secondary cartridge filter cleaned by compressed air pulse jet cleaning action
      • Quiet – muffler and insulated motor housing reduce noise level below 65 dBA
      • Properly Engineered Pipe – graduated 3” to 2” pipe maintains optimum velocity and reduces friction losses significantly compared to systems with 2” piping only
      • On/Off feature – micro switch turns system on and off when hose is plugged into the inlet
      • Easy to Install
      Optional Features:
      • Automatic pulse cleaning system, leg mounted stand option, HEPA filtration, brushless motor
  • Eurovac I 5HP, 7HP & 10HP – Board Mounted
    • Eurovac I 5HP, 7HP & 10HP – Board Mounted

      Specifications
      • Utilizes induction motors designed for nonstop operation
      • Rated to run over 20000 hours with little or no maintenance
      • 18” diameter cyclonic separator with 1 polyester cartridge filter (30 square ft./323 square meter filter media)
      • Removes 99% of the dust up to 3 micron
      • Automatic compressed air pulse jet cleaning ensures very little maintenance
      • All systems include control panel; available in three phase voltage, 60 or 50 hertz
      • Typically utilizes low voltage wiring to turn system on/off
      Optional Features:
      • Vinyl steel cabinet, special coatings, stainless steel construction, special discharge options, magnehelic differential pressure gauge, bag equalization, photohelic gauge; Custom system arrangements available upon request

      Applications:

      • Industrial, Body Shop, Woodworking, Aerospace, Detail, Pharmaceutical, Boatbuilding, Transit, Military

       

  • Eurovac I 5HP, 10HP & 20HP – “Combo Unit” Central Vacuum
    • Eurovac I 5HP, 10HP & 20HP – Combo Unit Central Vacuum

      Specifications
      • Utilizes induction motors designed for nonstop operation
      • Rated to run over 20000 hours with little or no maintenance
      • 24” diameter cyclonic separator with 2 polyester cartridge filters (100 square ft filter media)
      • Removes 99% of the dust up to 3 micron
      • Automatic compressed air pulse jet cleaning ensures very little maintenance
      • All systems include control panel; available in three phase voltage, 60 or 50 hertz
      • Typically utilizes low voltage wiring to turn system on/off
      Optional Features:
      • Sound attenuation cabinet, special coatings, stainless steel construction, special discharge options, magnehelic differential pressure gauge, bag equalization, photohelic gauge; Custom system arrangements available upon request
      Applications:
      • Industrial, Body Shop, Woodworking, Aerospace, Detail, Pharmaceutical, Boatbuilding, Transit, Military
  • Eurovac III – 10HP to 100HP Multi-Stage Pump Central Vacuum
    • Eurovac III – 10HP to 100HP Multi-Stage Pump Central Vacuum

      Specifications
      • Centrifugal multi-stage pumps which are available from 10 HP to 100 HP
      • Capable of producing from 300 CFM to more than 5000 CFM at vacuum levels of 5” to 12” of Hg
      • Eurovac units are outboard design, with impellers mounted on a separate shaft supported by two flange mount bearings and connected to a standard shaft motor via a flexible coupling; makes servicing much easier than with overhung models
      • 4-bearing outboard design will last far longer than 2-bearing overhung designs
      • Eurovac multi-stage pumps come with automatic lubricators to reduce maintenance
      • Eurovac III is designed to handle tough industrial jobs and will run problem-free all day
      • Very little maintenance required

      Optional Features:

      Sound attenuation cabinet, special coatings, stainless steel construction, special discharge options, magnehelic differential pressure gauge, bag equalization, photohelic gauge; Custom system arrangements available upon request

      Applications:
      • Industrial, Body Shop, Woodworking, Aerospace, Detail, Pharmaceutical, Boatbuilding, Transit, Military

       

  • Eurovac I – Central High Vacuum Wet Collector
    • Eurovac I – Central High Vacuum Wet Collector

      Specifications
      • Constant high efficiency and air flow
      • Minimum operation costs
      • Low maintenance
      • Stainless steel or galvanized construction
      • Easy access for inspection and routine cleaning
      • Fully automatic water level control system
      • Static Unit (no moving parts)
      • No water pump required
      • Standard units are available in capacities ranging from 150 to 1,500 C.F.M.
      Applications:
      • Processing and finishing of aluminum
      • Magnesium titanium
      • Stainless steel
      • Plasma cutting and plasma hot metal spraying
      • Laser cutting
      • Metting furnaces
      • Removing dust and odor from green sand mold cooling and shake out operations
      • Removing dust from shot blast operations
      • Grinding and buffing
  • Eurovac III – 10HP to 100HP Multi-Stage Pump Wet Collector
    • Eurovac III – 10HP to 100HP Multi-Stage Pump Wet Collector

      Specifications
      • Constant high efficiency and air flow
      • Minimum operation costs
      • Low maintenance
      • Stainless steel or galvanized construction
      • Easy access for inspection and routine cleaning
      • Fully automatic water level control system
      • Static Unit (no moving parts)
      • No water pump required
      • Standard units are available in capacities ranging from 150 to 1,500 C.F.M.
      Applications:
      • Processing and finishing of aluminum
      • Magnesium titanium
      • Stainless steel
      • Plasma cutting and plasma hot metal spraying
      • Laser cutting
      • Metting furnaces
      • Removing dust and odor from green sand mold cooling and shake out operations
      • Removing dust from shot blast operations
      • Grinding and buffing